Ender 3 recommended print speed. This is a solid average speed that should be ideal for a wide range of models and parts printed using filaments like PLA and ABS. Learn about the Ender 3 Print Speed, how to maximize it (for free and for cheap), and what the best print speeds are for PLA, PETG, TPU, and other filaments. Without upgrades, the ideal print speed for the Ender 3 (Pro/V2) is 50-60 mm/s. To get the most out of your Ender 3 (V2/Pro/S1), print speed is a key factor. TPU – 10 – 30 mm/s. You can print low speed (40-50 mm/s) for detailed prints and high speed (70-80 mm/s) for rougher models and prototypes. With upgrades like the Klipper open-source firmware, you can easily increase the print speed to 100 mm/s. The best print speed for Ender 3 machines usually ranges between 40-60mm/s. Enhance print quality, efficiency and performance by optimizing your 3D printer. Discover the perfect print speed settings for your Ender 3 model. Learn about the Ender 3 Print Speed, how to maximize it (for free and for cheap), and what the best print speeds are for PLA, PETG, TPU, and other filaments. . The default speed for the stock Ender 3 profile in Cura is dialed to 50 mm/s. Read on to discover the perfect Ender 3 print speed settings! The Ender 3 can achieve a maximum print speed of around 200mm/s – but that’s only sustainable for very specific prints! In this guide, I’ll discuss the best Ender 3 print speed settings I’ve found for all the main filaments, including: ABS – 40 – 60 mm/s. You can reach higher speeds, usually at a trade off with the quality of the model through imperfections like stringing, blobs, and rougher layer lines. That said, common Ender 3 speeds in Cura sit somewhere between 40 mm/s and 70 mm/s. PETG – 20 – 40 mm/s. rzal vucll tflrsimw qtgof rsurz srf gchjrj dvyhrx jfib drvyqn